Two computers, two USB ports, four decks and a range of effects.
Introducing the first professional DJ mixer with two USB 2.0 High Speed ports with support for real-time connection of two computers. Two DJs can work in parallel and/or seamlessly transition from one DJ to another.

Two independent USB 2.0 High Speed ports, each supporting twenty-two, 32-bit floating-point audio channels at 48 kHz.
Real-time support for two computers.
Support for 2, 3 or 4 Virtual Decks on one or two computers.
Direct control of over 30 Scratch Live Library, Cue and Loop functions.
Unique FlexFx bus:
Process a sub-mix of up to six audio channels.
Six internal effects with seamless on-beat switching between effects.
External analog insert support for legacy hardware effects.
USB insert support for computer-based effects.
Four full-featured input channels:
Four stereo Phono/CD inputs of Line, Phono or S/PDIF.
Four stereo auxiliary inputs.
Four stereo USB playback options.
Two mic inputs: one with phantom power and one with line-level.
3-band full-cut EQ, plus new High-pass / Low-pass Filter.
Flexible USB recording options, record from any PGM or output.
Internal universal switching power supply (100-230 VAC)








Front & RearPanels
The FlexFx Mix Level controls the level of the FlexFx signal going to the Main Mix.
The Contour Control for the PGM Faders affects all four channel faders.
The Contour Control for the Crossfader has a separate adjustment.
Both 1/4" and 3.5mm headphone jacks are ready to plug into.
The Fader section is easily removed for cleaning or replacement.

PGM Inputs 1-4
The Sixty-Eight has four stereo analog inputs for PGM 1 through PGM 4. Any of these analog inputs may be set for Phono Input, Line Input or S/PDIF using the P - L - S switches on the rear panel. Any of the four analog inputs may be used for Scratch Live vinyl emulation control. Input 1 or Input 2 may be selected for Scratch Live Virtual Deck 1 control. Input 3 or 4 may be selected for Scratch Live Virtual Deck 2 control. Control input sources are selected in Scratch Live.

Mic Inputs
The Mic Inputs accept an XLR or a balanced or unbalanced 1/4" plug. Mic 1 has a switchable phantom power option, and Mic 2 has a switchable line level option.

Analog Outputs
All analog outputs come from the same Main Mix signal. Main, Booth and Session outputs each have their own Level control. The Main output is on balanced XLR jacks. The Booth output is on balanced 1/4 TRS (tip-ring-sleeve) jacks, though unbalanced TS (tip-sleeve) plugs may be used. The Session output is on regular unbalanced RCA jacks. Because all signals are identical, users may use any of these outputs as the main output if a different cable type is required for connection.